Description
The die cutting foil stamping press1050-FSC type hot foil stamping press combines the press section, foil stamping
system and stripping section of this type of equipment all in one machine. This
allows the machine to finish one-time paper processing for foil-stamping, die
cutting, stripping and final collecting the papers in piles. And the highest
foil stamping speed can reach 6000 sheets per hour.
This die cutting and foil
stamping presses is equipped with a transverse and longitudinal foil pull system,
making it extremely suitable for fine and multilayer pattern stamping and
die-cutting. This machine features outstanding resistance to elevated
temperatures, and is capable of hot foil stamping under 200℃. It can also cool the high-temperature carton
board after hot stamping.
Processed materials
Paper
Carbon board
Corrugated board
Parameters
Processed materials
Paper
80 g/m²
Maximum carbon board
2000 g/m²
Maximum corrugated board
4 mm
Capability
Min. Sheet size
350 x 400 mm
Max. Sheet size
740 x 1050 mm
Speed
7500 sheets/h
Max. Foil stamping speed
6000 sheets/h
Die-cutting force
300 Ton
Converting
Max. Longitudinal stamping size
720 x 1020 mm
Max. transversal stamping size
580 x 1020 mm
Max. Die-cutting size
730 x 1040 mm
Heating system
Heating zones
12 units
Max. temperature
200 ºC
Foil equipment
Foil length
120 to 1200 m
Foil width
50 to 1020 mm (Longitudinal stamping)
Foil width
50 to 630 mm (transversal stamping)
Web advance shafts
3 (longitudinal stamping)
Web advance shafts
2 (transversal stamping)
Pile height
Feeder
1650 mm
Max. Feeder with non-stop
1270 mm
Delivery
1300 mm
Dimensions and Weight
L x W x H
7.08 x5.22x3.26m
Weight
21 Ton
Installation
Power
25 kW
Compressed air
6 bar
Air compressor capacity
30 m³/h
Air tank capacity
155 L
Air compressor power
3.5 kW
Die Cutting and Foil Stamping Presses Components
Feeder section
Continuous feeder without interruptions, feeding through pallets or carts
Material loading by pallets or carts
Designed with 4 lifting suckers and 4 forwarding suckers, ensuring smooth feeding of cardboard and corrugated board with different thicknesses in an efficient, reliable, and precise manner
Double sheet detector
Register table
Quick changeovers, easy adjustment for sheet size
The sheet alignment on the side can be easily made on the register table with guide rails.
4 front register lays, independently adjustable
Press section
The die cutter chase is designed with a central positioning system for fast positioning of the die.
Cutting die with 5 mm thickness
The pressure can be easily adjusted through the touch screen. Adopting over-pressure protection avoids any damage in the press.
Available with manual or automatic lubrication system.
7 light weight gripper bars
Changer-over bracket for cutting chase and honeycomb chase.
Pneumatic lock and release system for cutting chase and honeycomb chase.
Foil stamping system
The heating system features 12 temperature zones with individual temperature control.
Foil break detector
Foil fasten device
Foil unwind device
Honeycomb chase
Stripping section
Optimized cam movement curve guarantees stripping stability and accuracy.
Quick-locking and central positioning system assures the waste is cleared in a precise and quick manner.
Delivery section
Automatic delivery with non-stop curtain
Motorized movable longitudinal foil system
3 foil rollers in the longitudinal foil feeding system
Easy to remove and install
Can be used as a foil stamping machine with 3 longitudinal plus 2 transversal shafts or a regular die-cutter with stripping system.
Air blast foil separation system
Foil tensioning system
Transverse foil stamping system
2 foil rolls in a high precision transversal foil feeding system.