Description
The die cutting foil stamping press 1050-F type hot foil stamping cutting line uses a longitudinal foil pull system for large-format die-cutting and two-colored and multicolored pattern foil stamping of different papers, carton boxes, carton boards and corrugated boards. Among them, the maximum speed of foil stamping can reach up to 6000 sheets per hour.
This foil stamping press has outstanding resistance to high temperature, meaning it can perform hot stamping at 200℃. Besides, it can also cool the high-temperature boards after hot stamping.
Processed materials
Paper
Carbon board
Corrugated board
Parameters
Processed materials
Paper
80 g/m²
Maximum carbon board
2000 g/m²
Maximum corrugated board
4 mm
Capability
Min. Sheet size
350 x 400 mm
Max. Sheet size
740 x 1050 mm
Speed
7500 sheets/h
Max. Foil stamping speed
6000 sheets/h
Die-cutting force
300 Ton
Converting
Max. stamping size
720 x 1020 mm
Max. Die-cutting size
730 x 1040 mm
Heating system
Heating zones
12 units
Max. temperature
200 ºC
Foil equipment
Foil length
120 to 1200 m
Foil width
50 to 1020 mm
Web advance shafts
4
Pile height
Feeder
1650 mm
Max. Feeder with non-stop
1270 mm
Delivery
1300 mm
Dimensions and Weight
L x W x H
7.08 x4.28x2.55m
Weight
18.5 Ton
Installation
Power
35 kW
Compressed air
6 bar
Air compressor capacity
30 m³/h
Air tank capacity
155 L
Die Cutting and Foil Stamping Presses Components
Feeder section
Continuous feeder without interruptions, feeding through pallets or carts
Material loading by pallets or carts
Designed with 4 lifting suckers and 4 forwarding suckers, ensuring smooth feeding of cardboard and corrugated board with different thicknesses in an efficient, reliable, and precise manner
Double sheet detector
Register table
Quick changeovers, easy adjustment for sheet size
The sheet alignment on the side can be easily made on the register table with guide rails.
4 front register lays, independently adjustable
Press section
The die cutter chase is designed with a central positioning system for fast positioning of the die.
Cutting die with 5 mm thickness
The pressure can be easily adjusted through the touch screen. Adopting over-pressure protection avoids any damage in the press.
Available with manual or automatic lubrication system.
7 light weight gripper bars
Changer-over bracket for cutting chase and honeycomb chase.
Pneumatic lock and release system for cutting chase and honeycomb chase.
Foil stamping system
The heating system features 12 temperature zones with individual temperature control.
Foil break detector
Foil fasten device
Foil unwind device
Honeycomb chase
Delivery section
Automatic delivery with non-stop curtain
Longitudinal foil feeding unit
4 foil rolls in a high precision longitudinal foil feeding system
Air blast foil separation system
Foil tensioning system